Here is a photo of Dan Quarta's original paddle for reference:



Start with a 12" x 24" piece of clear pine and cut to shape, drill hole, sand smooth, bevel the edges, then paint a Navy blue.
The brother's name was added using white paint then the logo was applied (at the time we had a silk screen).
Below is a paddle covered with 1/4" graph paper to get the dimensions of the paddle as best as possible.
When using a logo to make screen or a decal the original size was 5" x 5".
Below is a high resolution copy of the Sig Tau logo to use to make the logo.






(Note: The logo was done in the reverse on the original paddle - see below)



The blue should be cleared out as it is provided by the paddle (RGB 33 34 101)